Category: Blog

In the making category-my Griff Traveling Stitches vest continues to flow fairly smoothly off the needles- I’ve made a few silly mistakes along the way, but nothing that I haven’t been able to fix by dropping back a few stitches and rearranging/reknitting.

I’m just finishing the waist shaping on the back. At this rate, I might have this done in a couple weeks.

I haven’t been able to find any pictures of the kind of neckline/collar that I’m envisioning. But it seems like it should work….

Took a little break from knitting this weekend to do a little spinning. This is more of that gray mystery fleece from back in August that made such a nice squishy cap. Silver lining to cold rainy weather is being able to dry yarn on the pellet stove again.

Think I’ll do the same thing again, chaining the yarn as I knit to make it kind of aran/chunky weight.

And in the mending category- I got my neat little darning loom out to finally fix a hole in a wool top that I’d left too long. It had started to run, and so I figured it was now or never.

Here I am in stage two of the mend

Stage three complete-

I should have taken a before pic (oops) but you can get an idea of the damaged area from the back

It was a little tricky getting it mounted on the darning loom because the fabric is pretty stretchy, but it got easier as I went on (anchoring each sucessive patch in the edge of the previous). Hopefully now this comfy shirt will see much more wear. yay!

And also this week, I got some lovely quince from Schoonover Farm. OMG folks, have you ever smelled quince? (if only someone could develop scratch and sniff technology for the web)

And today The Man turned them into jam

So yum.

Have a good week everyone-

Looks like this year’s WSU Country Living Expo is going to be web-based again. Last year I sat it out because I wasn’t up to trying to convert what are usually very hands-on classes into zoom offerings. But it sounds like there is strong interest in the subject matter, so this year I’m going to give it a try, at least for the Wool Processing one.

To make the whole thing more manageable and hopefully make up for the lack of actual hands on experience people would otherwise get with carders and combs and such, I’m thought I’d record a series of demo videos of start-to-finish processing of a fleece that I can pull up during the class. And I’m also going to make up fiber sample packs of that same fleece in different stages of prep for the folks who register.

But, as it turns out, I’d already washed up all my fleeces from this year! So I had to acquire one for this purpose. This fleece is from Persia, a Jacob who lives a few miles down the road from us. I don’t think I’ve ever processed Jacob wool before, so it seemed like a cool opportunity.

Was out in the hoophouse recording the first of the series- fleece intro and skirting, but Boo kitten kept trying to get in on the action

I’m in the middle of my little video and out of nowhere she pops up and starts nesting in my wool. Silly girl. It was only after I took this photo that I realized how well she matches the fleece with all it’s smoky gray shades- So maybe it was meant to be. I was eventually able to get a few kitten-free minutes of footage that should work.

And I’m making good progress on my Griff Twisted Stitches vest- Front is complete, and I’m about 3 inches into the back. Really enjoying this knit so far, and I think it will end up being something I wear a lot too.

That’s about it here- hope you all have a a good halloween. We’ll just be laying low here- critters will get treats, and we’ll hope for no tricks!

Things are quiet and mild on the homestead this evening. But we are supposed to have a major storm blowing in by tomorrow am.

Wind advisory in effect from 8 am Sunday through Tuesday.

Cliff Mass seems pretty excited about it . Me, not so much.

I thought I’d go ahead and post early, as it’s fairly certain that we will lose power for a good part of the next couple of days. That’s just how this usually works out. (Thank goodness for the generator)

The last Alger Market (ironically, a makeup day for a bad weather cancellation a while back) is tomorrow. And I’m planning to attend, but we’ll just have to see how it goes. Maybe the storm will hit further north and the impact in these parts will not be so bad (fingers crossed).

Last call for all kinds of woolen goodies- including sweet little sheep puppets!

Also washed fleece, carded wool, lots of yarn. and farm-fresh free range eggs. So if the weather holds and we don’t get blown away, I’ll be hangin’ in my little booth, working on my Griff Twisted Stitches Vest, which is coming along very nicely.

Just a couple more rows before I start the armhole shaping. Finally decided on a v-neck, so that will start shaping up shortly as well. Have an idea I’m playing with about doing a fold-back collar on the v-neck, but there’s a lot of knitting yet to do before I start the finishing work, and the neck opening would be the same as a regular v-neck, so I can let that thought percolate for a while yet.

Oh, and I should tell you- I gave up on my lanolin extraction experiment. Too small a sample, I think. couldn’t figure a way to separate the tiny bit of lanolin from the water and olive oil. Might give it another try in the spring when I have more greasy fleece to play with.

Have a good week folks!

Been itching to get something substantial on the needles for a while.

I really thought it was going to be a Cali project, as I’d been really focused on spinning her fleece for a while now, and have almost 800 yards of 3 ply DK-ish weight yarn finished.

So I’d been hunting for a pattern. I have so many “favorites” saved on Ravelry, and checked through them for inspiration, but nothing was striking me quite the right way. After much browsing, I finally decided that I was in the mood to do a loose-fitting, solid color vest with a traveling, twisted stitch pattern- for a cable-y effect without as much bulk. And this seemed to fit the bill

There wasn’t much pattern info in Ravelry, but I bought it anyway, since I’d finally found a photo that looked like what I wanted to make. And upon downloading the PDF, I found that it is entirely written out line by line instructions. Not a chart in sight.

Ugh.

Not entirely unexpected. But Ugh.

I know there are people out there who prefer written out directions. But I guess I’m more of a visual learner. And since I knit backwards, conversion of these instructions to something that I can work from directly is a bit of a challenge.

At first, I thought that the answer was to make my own charts from the directions. But in order to do that, I had to try and think like a right-handed knitter. What does T2B or C2B mean to a person working from right to left, rather than left-to right? Made my brain tired, so I set it aside to let me unconscious mind work on it.

And once I stepped back from it a bit, it came into better focus.

I realized that, with the help of the photo, which thankfully shows all the different patterns in their entirety, after carefully casting on to the specified counts, placing markers and doing the first (set-up) row, I could ignore most of the written details, and use the photo for most of the cues about which way the twisted stitches are travelling, and where they are crossing.

I swatched with my Cali yarn, but it turned out that the yarn was a bit to light to get the desired gauge. But thankfully, I had just the thing in the stash, waiting to become a garment! Griff to the rescue!

Now that I’m through a couple of repeats of each pattern, I feel like I’m cruising. And I’m relived to have something on the needles that I can just pick up and work on.

So now I find my mind wandering to different types of necklines/collars. The crewneck isn’t bad, but would v-neck be better and most versatile? or even a shawl collar? Hmmm.

And an update on the lanolin experiment- Found info online about refining lanolin and applied it to my tiny sample

It did separate as they said it would- we’ve got olive oil on top, lanolin in the middle and dirty water below. But now my challenge is figuring out how to get the lanolin out of the middle layer without losing most of it. Haven’t been able to find any guidance on that step yet. My current thought is that perhaps if I freeze it it will be more manageable.

Have a good week-