Blog

Close Call, Vet Call

Edgar’s had a tough few days.

Thursday evening after I got home from work a neighbor came by to tell me that she had seen Edgar on his back struggling and unable to right himself that afternoon. She and her son hopped our fence to help get him back on his feet, and he kind of staggered away.

When I checked on him that evening, he was kind of sluggish, with some swelling around his left eye. I gave him some GasX and baking soda and he seemed to perk up a bit. Also trimmed some wool off him in hopes that it would make it easier to get himself back up if he flipped over. But I had no idea how he ended up on his back in the first place.

I stayed home Friday to keep an eye on him.
He seemed ok but subdued when I checked on him in the early morning, and I kept a pretty close watch on him throughout the day.

Sometime in the early afternoon, I think he took another tumble, but was able to get himself back up.
When I got to him he was stumbling around in a circle, and he seemed kind of discombobulated and unsteady on his feet.

I started thinking that perhaps he’s eaten something toxic, so I did a sweep of the pasture to see if I could find anything suspect.
Found one outcropping of mushrooms on a rotting poplar log, and took some pictures to post online and see if I could get a positive ID.
Gave Edgar some activated charcoal capsules.

A little while later he was on his back in the shed. I raced out there to help him. His breathing was very fast and shallow and I steadied him until he was able to calm down and get settled in a good spot in the shed.

Then I called the vet.

He got out to us around 6 and I gave him the run-down on what had happened so far.
By this time, Edgar had recovered from his last fall, and was not in any kind of obvious distress, although his left eye was drooping and he was still kind of listless.

The doc checked his temperature, eyesight, rumen activity, heatbeat, looked for any signs of abdominal discomfort, tested his balance, and I don’t even know what all else. Didn’t seem to be any obvious answer to what was going on. In the end he took two vials of blood to test and see if we can figure out why he seems to be having seizures.

I haven’t heard anything back yet about the results of the bloodwork. But feedback on the mushrooms from a couple of mycology sources agree that they are not toxic (flammulina), so probably not the source of the problem.

We’ve been monitoring him closely over the weekend, and he seems to be improving, up and grazing with the rest of the crew, and this evening his left eye appears more normal.

To me, the most encouraging sign is that he is slowly getting his Edgar ‘tude back.

I really hope that he’s on the mend.
and I am so thankful for the folks who saw him in distress and came to his aid on Thursday afternoon.

So keep a good thought for Edgar. He’s had a tough couple of days.

E-spinner Progress

I think we’re almost done gathering all the parts and pieces required for the e-spinner project-

We’ve got the motor-

IMG_20170309_065520158_HDR

And the motor controller-

IMG_20170309_065540925_HDR

The man has wired those guys up and done some basic operational testing

IMG_20170308_175637984

And just yesterday the on/off, forward/reverse push-button switches and the dial for speed adjustment arrived.

2017-03-12_04-53-00

I can’t wait to start putting all the bits together and build the box it will be mounted in!

Spin Mod

Hey hey hey- Electric Spinner motor and controller are on their way.
Should be here tomorrow, and then we can start figuring out how this thingee is going to work.

In the meantime, I’ll share a mod I’ve made to the Kromski Sonata flyer that we’re going to be using for the e-spinner project.

Right now this flyer is on my lateral treadle wheel that The Man built for me a few years ago.
It works well, and is very sturdy, but I’ve always found the hooks kind of annoying.

IMG_20170305_070723028

I didn’t realize when I selected this flyer that the hooks pivot.

IMG_20170305_070742889

I think that it must be to give you a little more lateral flexibility in how the yarn winds on. It’s fine for heavier yarns, but with finer singles I find that I can’t get a good even application of yarn on the bobbin. I get little hills, with valleys in-between.

Amazingly, I found that the hooks pull easily from the flyer arms, so I didn’t have to fuss at all over the removal. Nice.

And I have fitted on of the arms with a makeshift sliding yarn guide.

IMG_20170305_070830327

IMG_20170305_070810060

IMG_20170305_070821263

Pretty simple fix. And working well so far!

Fleece Preview, Wannabe Spring Chickens

Last days of February- winter in the morning, spring in the afternoon.
First time this year that I’ve hung out yarn to dry in the sunshine!

2017-02-26_03-47-35

Probably a few weeks away from shearing, but the fleeces are looking very nice.

Chone-

IMG_20170226_172040677

Dottie-

IMG_20170226_172123157

IMG_20170226_172254021

Edgar-

2017-02-26_03-48-11

The shy white boys Frank

2017-02-26_06-43-33

and Felix

2017-02-26_06-43-08

opted not to participate in the fashion show, but when I last had my hands on them for hoof-trimming their fleeces were in much better shape than last year. So fingers crossed that they are not all felted up again!

And here is a little spring chicken action- feathered friends are good company for garden work

The Man is researching motors, controller, and pulleys and such- so hopefully we’ll have parts soon to play with for the e-spinner project. Stay tuned! 🙂